Multivalve is a very important component in a Gas Conversion Kit. Though there are lots of Multivalves manufactured by different companies available in the Indian market, only a few have  performance perfectly. Turkish made Aldesa Beta Gaz Multivalves which is manufactured using the most modern and safest technologies in this field is being distributed by Gas Energy for the Vehicles in India. These Multivalves satisfies all International Standards and is manufactured in E 67 R 01 European Standard and has obtained the Approval of Petroleum and Explosives Safety Organization for use in India. The official Distributor of Aldesa Beta Gas Multivalves for India is Auto Gas Energy India Limited.

Due to applicable standards and for safety reasons, the tank should not be over filled. The maximum filling rate is 80% of the total capacity while the remaining 20 % will be left for LPG vapor, does enabling the tank liquid to expand without taking up all the volume as temperature rises. In order to get refilling to stop timely, the multi-valve is equipped with a device, connected to a float, to cut off LPG flow at maximum permissible level.

LPG coming from the fuel pump passes through the multi-valve during refilling. A good multi-valve will not show much resistance to LPG passing to avoid prolonged refilling.   The level of LPG in the tank can be measured with two magnets, one installed in the tank and adjacent to the device connected to the gauge on the external side of the tank.
 

The multi - valve ensures LPG suction through a suction pipe leading to the bottom of the tank

There are two valves on the multi-valve to block the suction and filling pipes. Such valves are generally open, but may be closed for maintenance or in case of an accident.

    ASSEMBLY

The multi-valve has a float for LPG level display and a pipe for a gas suction. Strictly no intervention is permissible on the float stick during assembly. Otherwise, it will fail to function at the maximum capacity which is 80 % . The most important issue in the multi-valve assembly is it is being parallel to the horizontal plane.